Pygmalion
Pygmalion Protection Cardboard 50 m²
Protects your floors and surfaces against paint splashes and dust over 50 m². Resistant to foot traffic and 100% recyclable for a clean worksite.
49,99 €
24-48hMy cart
Your cart is empty.
FlüggerRef. Kit 25 m² (petite pièce / chambre)
Kit 25 m² (small room / bedroom)
Kit for painting walls and ceilings up to 25 m²: 10 L of Wall Primer, 10 L of Dekso Ultramat and 10 L of Flutex 2S. Everything you need for a bedroom, from preparation to finish.
In stock
326,27 €-10%
293,64 €incl. VAT11,75 €/m² incl. VAT
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
3× ou 4× sans fraisdès 73,41 €/mois
Estimated delivery: 24-48h
Free shippingFrom €69 ex. VAT in BE · 24-48h
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
Kit 25 m² (petite pièce / chambre)
This kit brings together everything you need to repaint a bedroom or a small room of up to 25 m², walls and ceiling included. It combines a bonding primer, two Flügger matt finish paints and the right tools. Everything is delivered together, ready to use, with no additional purchase required.
Technical specifications
- Kit contents: 10 L of Wall Primer, 10 L of Dekso Ultramat and 10 L of Flutex 2S, i.e. 30 L of Flügger products.
- Intended surface: walls and ceiling of a room up to 25 m².
- Wall Primer: acrylic interior primer that prepares the substrate before the finishing coats.
- Dekso Ultramat: ultra-matt finish paint.
- Flutex 2S: white acrylic paint with a matt finish, for walls and ceilings.
- Tool cleaning: with water (Flutex 2S).
- Tools: included in the kit, suited to applying the products.
Application tips
Start by preparing the substrate: it must be clean, dry, dust-free and free of any crumbling parts. Fill holes and cracks, sand the repaired areas, then remove the dust again. Protect floors, skirting boards, door and window frames and sockets before opening the tins.
First apply the Wall Primer to all the surfaces to be painted, especially on repaired areas or areas with different porosity. This undercoat evens out the substrate and prepares it for the adhesion of the finishing coats. Then leave to dry according to the instructions in the technical data sheet before applying the finishing coats.
For the finish, paint the ceiling first, then the walls. Cut in the corners and edges with a brush, then use the roller on large surfaces, in regular strips, without overloading the tool. The number of coats depends on the condition of the substrate and the starting colour. Rinse the tools with water after using the acrylic paint Flutex 2S.
Technical specifications
| Use | Interior, not subject to direct water splashes |
| Brand | Flügger |
| Coverage | 25 m² (floor) |
| Room type | Bedroom, office, interior room |
| Application | Interior walls and ceiling |
| Kit contents | Primer + finish paint |
Pro tips
Visible patches in matt paints most often come from a substrate whose absorption is uneven: a filled or sanded area "drinks" differently from the rest of the wall. Always apply the primer over the entire surface, not just on touch-ups, to avoid a patchy effect once the finish is applied.
For the finish, work in full panels, from the ceiling towards the walls, and keep a wet edge by crossing your strokes without interruption. Check the result in raking light (open window or work lamp) before the end of the coat: this is when you can correct any missed spots or excess paint.
FAQ
Is this kit sufficient for a 25 m² bedroom with standard ceiling height?
Yes, the kit is calculated to cover walls and ceiling of a 25 m² floor area room with standard Belgian ceiling height. For heights above 2.70 m or highly absorbent surfaces, consult our advisors to adjust quantities.
Can this kit be used for rooms other than bedrooms?
Absolutely. This kit suits any interior room of approximately 25 m²: office, small living room, guest bedroom or even a workshop. The key is that the surface matches and the room is for indoor use without direct water splashes.
Is a primer coat needed even on an already painted wall?
A primer coat is still recommended even on painted walls, particularly if you are changing colour or the old coating is porous or uneven. It uniformises absorption, reduces finish consumption and improves the final result. On sound substrate of the same colour, a single primer coat may suffice.
What is the difference with a kit for a smaller surface?
The difference lies in paint quantities supplied. A 25 m² kit matches the needs of a spacious master or guest bedroom, whereas a kit for smaller surface suits a child's room or office with reduced dimensions. Choice depends on your room's floor area.
