My cart
Your cart is empty.
WagnerRef. 2437240
FinishControl 4000 FineSpray KIT (2 batteries et chargeur)
Cordless sprayer with XVLP technology for painting woodwork and hard-to-reach surfaces. Supplied with 2 batteries and charger for continuous work, fine and even spray.
In stock
961,95 €incl. VAT
PackagingFinishControl 4000
FinishControl 4000
Free in-store pickupRue Henri Brosteaux 82 · 5070 Sart-Saint-Laurent — ready within 24 business hours
3× ou 4× sans fraisdès 240,49 €/mois
Estimated delivery: 3 à 5 jours
Free shippingFrom €69 ex. VAT in BE · 3 à 5 jours
Best price30-day guarantee
Expert advice+32 (0) 475 48 80 24
Official distributorFlügger Belgium
FinishControl 4000 FineSpray KIT (2 batteries et chargeur)
The Wagner FinishControl 4000 FineSpray KIT offers total freedom of movement for finishing, touch-up and renovation work on small projects. Running entirely on battery power thanks to XVLP technology, this cordless sprayer makes it easy to reach difficult areas (staircases, electrical panels, furniture, woodwork) without being restricted by a cable or air hose. The FineSpray nozzle, specifically designed for low-viscosity products, guarantees a fine, even spray for a professional finish on varnishes and lacquers.
Technical specifications
- Cordless operation thanks to a removable 18V battery
- Complete kit with 2 batteries and 1 charger
- Charging time: approximately 65 minutes for a full charge
- 370 W brushless motor for optimal atomisation
- Maximum working pressure: 0.2 bar (0.02 MPa)
- Noise level: 85 dB(A) pressure, 93 dB(A) power
- Click&Paint technology for quick colour changes
- Compatible with the AMPShare cross-brand battery system (Bosch 18V)
Application tips
Before spraying, make sure the surface is clean, dry and free of dust: a poorly prepared surface directly compromises the fineness of the spray and the product's adhesion. The FinishControl 4000 is designed for water-based and solvent-based varnishes, lacquers, oils, release agents, synthetic resin varnishes, PVC varnishes and two-component varnishes — always check the compatibility of your chosen product before application.
Work at a constant distance from the surface, using regular, parallel movements to avoid build-up and drips. Thanks to Click&Paint technology, changing the cup and colour takes just a few seconds, making multi-colour projects easier without interrupting your workflow.
For the most demanding finishes, combine this device with a support stand and a lint-free cloth to clean the nozzle between uses, ensuring a clean and consistent spray over time.
Technical specifications
| Référence | 2437240 |
| Alimentation | Batterie 18V amovible, 2 incluses + chargeur |
| Niveau sonore | 85 dB(A) pression / 93 dB(A) puissance |
| Temps de charge | ≈ 65 minutes |
| Puissance moteur | 370 W (brushless) |
| Matériaux compatibles | Vernis eau/solvant, laques, huiles, agents de démoulage, vernis PVC, vernis 2K |
| Compatibilité batterie | Système AMPShare (Bosch 18V) |
| Pression de travail max | 0,2 bar (0,02 MPa) |
Pro tips
The most common pitfall with an XVLP sprayer like the FinishControl 4000 is overlooking product viscosity: even though it's designed for low-viscosity liquids, a varnish that's too thick will quickly clog the FineSpray nozzle and result in an uneven spray. Professionals systematically check the fluidity of the product before starting, diluting slightly if necessary according to the applied product manufacturer's recommendations.
Another job-site tip: take advantage of the kit's 2 batteries to alternate charging and use without interrupting your work — while one battery is running, the other recharges in about 65 minutes. This is particularly handy on renovation sites where access to a power outlet isn't always convenient.
FAQ
Combien de temps faut-il pour recharger une batterie ?
Comptez environ 65 minutes pour une charge complète d'une batterie. Le kit incluant 2 batteries, vous pouvez alterner et travailler quasi sans interruption.
Quels types de produits puis-je pulvériser avec ce pulvérisateur ?
Le FinishControl 4000 est compatible avec les vernis à l'eau et solvantés, les laques, les huiles, les agents de démoulage, les vernis résine synthétique, les vernis PVC et les vernis bi-composants. Vérifiez toujours la fluidité du produit, la buse FineSpray étant conçue pour les liquides peu visqueux.
Puis-je utiliser mes batteries Bosch 18V sur cet appareil ?
Oui, le FinishControl 4000 fait partie du système de batterie croisé AMPShare, compatible avec les outils 18V Bosch depuis 2008. Cela permet de mutualiser vos batteries entre plusieurs marques d'outillage professionnel.
L'appareil est-il bruyant à l'utilisation ?
Le niveau sonore est de 85 dB(A) en pression et 93 dB(A) en puissance. Le port d'une protection auditive est recommandé lors d'une utilisation prolongée, comme pour tout outil électroportatif de ce type.
Que contient exactement le kit ?
Le kit FinishControl 4000 FineSpray comprend l'appareil, 2 batteries 18V et 1 chargeur, prêts à l'emploi pour démarrer directement vos travaux de finition.
